Description
| Design variant/feature | NNU/W33 |
Dimensions
| d | 480 mm | Bore diameter |
|---|---|---|
| D | 790 mm | Outside diameter |
| B | 308 mm | Overall bearing width |
| D1 | ≈ 701 mm | Shoulder diameter outer ring |
| F | 557 mm | Raceway diameter inner ring |
| b | 22.3 mm | Width of annular groove |
| K | 12 mm | Diameter lubrication hole |
| r1,2 | min. 7.5 mm | Chamfer dimension outer ring |
| r3,4 | min. 7.5 mm | Chamfer dimension inner ring |
| s | max. 12 mm | Permissible axial displacement from the normal position of one bearing ring relative to the other |
Abutment dimensions
| da | min. 513 mm | Abutment diameter spacer sleeve |
|---|---|---|
| da | max. 545 mm | Abutment diameter spacer sleeve |
| db | min. 562 mm | Abutment diameter shaft |
| Da | max. 757 mm | Abutment diameter spacer sleeve / housing |
| ra | max. 6 mm | Fillet radius |
| rb | max. 6 mm | Fillet radius |
Calculation data
| Basic dynamic load rating | C | 7 040 kN |
|---|---|---|
| Basic static load rating | C0 | 14 300 kN |
| Fatigue load limit | Pu | 1 080 kN |
| Reference speed | 630 r/min | |
| Limiting speed | 800 r/min | |
| Calculation factor | kr | 0.35 |
Tolerances and clearances
General bearing specifications
- Tolerances: Normal, P6, P5
- Radial internal clearance: cylindrical bore, tapered bore
Bearing interfaces
- Seat tolerances for standard conditions
- Tolerances and resultant fit
Double row cylindrical roller bearings are designed to accommodate high to very high radial loads in combination with medium to high speeds. The NR assortment includes many designs and variants, such as standard and full complement bearings and also greased and sealed bearings. Depending on the configuration of the outer and inner rings, the bearings are available in locating as well as non-locating designs.
- High to very high radial load carrying capacity
- Low friction
- Long service life
