Description
Dimensions
| d | 15 mm | Bore diameter |
|---|---|---|
| D | 28 mm | Outside diameter |
| Dw | 3.5 mm | Diameter roller |
| Ea | 16 mm | Raceway diameter (min.) roller and cage thrust assembly |
| Eb | 27 mm | Raceway diameter (max.) roller and cage thrust assembly |
Calculation data
| Basic dynamic load rating | C | 11.2 kN |
|---|---|---|
| Basic static load rating | C0 | 27 kN |
| Fatigue load limit | Pu | 2.45 kN |
| Reference speed | 4 300 r/min | |
| Limiting speed | 8 500 r/min | |
| Minimum axial load factor | A | 5.8E-5 |
Associated products
| Shaft washer | WS 81102 |
| Housing washer | GS 81102 |
| Universal washer | LS 1528 |
Tolerances and clearances
General bearing specifications
- Tolerances: table, table, values
Design considerations
- table
Bearing interfaces
- Seat tolerances for standard conditions
Cylindrical roller and cage thrust assemblies are designed to accommodate heavy axial loads and peak loads in one direction, but not radial loads. Thrust assemblies can be used in applications where the adjacent components serve as raceways and enable bearing arrangements with a low axial section heights. Where the adjacent components cannot serve as raceways, they can be combined with one or two bearing washers to create complete bearings.
- High axial load carrying capacity
- High stiffness
- Long service life
- Require little axial space
- Can be combined with bearing washers
